Hand-made natural interiors

A feature wall, from $3.74 a square foot.

Panels woven by hand from one natural material: straw rope, rattan, bark, willow, crystal. Each covers 16 sq ft. Send the width and the height of your wall and we come back with the panel count, the price and a lead time, usually within a day.

$59.99 to $119.99 a panel · 28 in stock now · shades from $9.99 · furniture from $129.99

A living room clad floor to ceiling in hand-woven mulberry wall panels
Priced by the wallNot by the piece. You never buy a panel you do not need, or come up one short.
One material, no veneerWorked by hand and bound to the panel. Nothing printed, nothing photographed onto board.
Every size publishedInches and cm, plus the sq ft each panel covers, so it can go straight into a drawing.
Damaged? ReplacedReport a damage or defect and we replace it. Ask us for detail shots before you commit.

Wall panels · in stock

All 28 wall panels, with the price per square foot.

Twenty-seven are 24″ × 96″ covering 16.02 sq ft; the backlit crystal comes in three sizes of its own. Grouped by material. Tap any panel to open it on Zornits.

28 panels

Branch

7 panels

Fibre

6 panels

Rope

4 panels

Timber

4 panels

Bark

3 panels

Wicker

2 panels

Rattan

1 panel

Stone

1 panel

Lighting

All 50 pendant shades, from $9.99.

Woven by hand in straw, wicker, rattan, bark, bamboo, hemp and driftwood. Shade only, sized to a standard pendant cord. Lighting ships in 7 to 10 business days.

50 shades

Straw

20 shades

Bark

6 shades

Bamboo

5 shades

Wicker

5 shades

Driftwood

4 shades

Hemp

3 shades

Mulberry

3 shades

Rattan

2 shades

Timber

2 shades

Furniture

All 56 pieces, from $129.99.

Benches and tables cut from single blocks of elm and pine. Beds, sofas and seating in undyed sheepskin and cowhide. Stone and marble tops on solid oak. Now listed, the wall panels went live first.

56 pieces

Elm

13 pieces

Pine

12 pieces

Sheepskin

10 pieces

Cowhide

6 pieces

Hide

6 pieces

Stone

5 pieces

Reed

3 pieces

Timber

1 piece

Price my wall

Give me two numbers and I will give you the whole wall.

This is the same arithmetic we run when you send an enquiry, published so you can check it before you talk to anyone. Each panel covers 16.02 sq ft; we round up to whole panels because a wall cannot be finished with three quarters of one.

The figure it gives you is the panel cost. Delivery and any trim are confirmed in the written quote.

Enter a width and a height and the panel count appears here.

Why buy this here

Six reasons, all of which you can check.

Natural panelling is normally sold through a trade showroom, where the price arrives after the meeting. Everything below is on the page instead.

01

The price is printed

$59.99 to $119.99 a panel, and the per-square-foot figure sits on every card. No enquiry needed to find out whether it is in your budget.

02

You pay for a wall, not a box

Send two measurements and we work out the count. Order sixteen panels for a wall that needed fourteen and you have paid $119.98 for nothing.

03

One material, worked by hand

Rope is rope, bark is bark. No print film, no MDF core with a photograph of a material on the face.

04

Specifiable

Every size in inches and cm, coverage stated, materials named. Enough for a designer to put it in a drawing without emailing first.

05

The variation is the product

No two panels match, which is why we ask you to order a wall in one batch rather than adding to it in six months.

06

One person, start to finish

The same contact from the first measurement to the delivery, so nobody re-explains the job.

How a quote works

Three steps, about a day.

1. Measure

Width and height of the wall, in feet or metres. A photograph helps but is not needed.

2. We price it

Panel count, total, lead time and anything the wall needs at the edges. Written, so you can hold us to it.

3. It is made

Panels are cut and woven for your wall, from one batch, and shipped with a tracking link.

Shop by material

Start from the material, not the shape.

Tap one to filter the panels above.

In place

Rooms it belongs in.

Photographed as installed, not styled on a white background.

A corridor wall clad end to end in woven straw rope panelsThe hallway
A driftwood panel wall behind a low linen sofaThe living room
Three bark pendant shades hung over a stone kitchen islandThe kitchen
A bark pendant beside a bed against a plastered wallThe bedroom

Trade & hospitality

For hotels, restaurants and designers.

Custom sizes, larger runs and specification support. Send the drawing or the room schedule and we quote against it, including a batch plan so the whole job matches.

How many panels do I need?

Each panel is 24″ × 96″ and covers 16.02 sq ft. Divide your wall area by 16 and round up, or use the calculator above and we will confirm the count in your quote.

Why can’t I add a wall panel to the cart?

Because almost nobody wants exactly one panel. Walls are priced whole: you send the width and the height, we come back with the panel count, the total and a lead time. It stops you paying for a panel you do not need, or coming up one short.

Are the panels really one material?

Yes. Straw rope, rattan, bark, willow, hemp, wool, paper or crystal, worked by hand and bound to the panel. Nothing is printed, and nothing is a photograph of a material laid over board.

Will two panels look the same?

No, and that is the point. Natural fibre and grain vary between panels and between production runs. Order the whole wall in one go so the batch matches.

How long does delivery take?

Lighting ships in 7 to 10 business days after a 2-day processing time. Wall panels are cut to your wall, so the lead time comes with your quote.

What if it arrives damaged?

Contact us and we replace it. Note that furniture and lighting are not returnable for a change of mind, only for damage or defect, so ask for measurements and detail before you order, and we will send them.

Luxury Furniture at Zornits support@zornits.com  ·  +1 385-332-7461