Zornits Furniture
Dining tables sized for the room, not the photo
Four sintered stone dining tables, and nothing else on the page to distract you. Every one lists its real length, width and height, because a dining table is the one piece of furniture that either fits the room or ruins it.
Tables from $1,399.99
Shown aboveMaison Dining Table from $1,399.99
- Delivered in 2 to 3 daysAfter a 24 hour processing window, per the shipping policy.
- Cancel free within 24 hoursNo penalty before it ships. Email us with the subject Cancel.
- Damaged or defective, we replace itSend photo proof to support@zornits.com and we arrange a replacement.
- Furniture is non-returnableExcept for damage or defect. Measure before you order, that is what this page is for.
Before you choose
Measure the room, then count the seats
Four numbers decide whether a dining table works. These are the standard interior rules of thumb, not claims about any product below. Furniture here is non-returnable, so it is worth five minutes with a tape measure.
Worked example
A 12 by 10 foot dining room
- The room is 144 by 120 inches.
- Take 36 inches off each side for chairs and walking: 72 inches of length left, 48 inches of width.
- A table 71 inches long by 35 wide fits inside that, with room to spare on the width.
- 71 divided by 24 is 2 seats down each side. Add one at each end if the base allows, so 4 to 6 people.
That room takes the Maison at 71 inches, or either table at 63 inches if you want the walkway looser.
01 Per person
Give every seat 24 inches of edge
Two feet of table edge per person is the comfortable minimum. On a 63 inch long table that is two chairs down each side. Divide the length by 24 and round down, then do the same for each end if the base leaves room.
02 The base decides the ends
A centre base can cost you two seats
This is the rule people miss. A table on splayed legs at each end seats people at the ends. A single sculpted or X shaped base spreads out where the feet go, so the ends often will not take a chair. It is why the Cavara is rated for 4 at 63 inches while a table the same length on end legs seats 6.
03 Around the table
36 inches of clear floor, all the way round
You need 36 inches from the table edge to the nearest wall or unit to pull a chair out and sit down. Make it 42 to 48 inches where people have to walk behind a seated guest. Add both sides to the table size to get the room size you actually need.
04 Table to seat
10 to 12 inches between seat and top
Every table on this page stands 29 to 29.5 inches high, which is standard. That puts the right chair seat at roughly 17 to 19 inches off the floor. The tops here are 31 to 35.4 inches wide, which is just under the usual 36 to 44, so they suit narrower rooms and leave less room down the middle for serving dishes.
4 tables
The four tables
All four are rectangular sintered stone on a steel base, and all four stand 29 to 29.5 inches high, so the height never changes the decision. What does change it is length, base shape and finish. Pick the leg colour, the tabletop and the length on the card. The price updates as you choose, because on two of these four the length changes what you pay.
Maison Dining Table
Two splayed steel legs, so both ends of the table stay usable. 63 or 71 inches long at 35 wide, or 78 inches long at 31 wide. Sintered stone top, rated to 250 lbs.
Cavara Dining Table
Its base is a rounded X on an OVAL foot, which is the quickest way to tell it from the Modern below. Carbon steel in black or gold under a 12mm sintered stone top. 160 or 180cm long, which is 63 or 70.9 inches. NSF certified.
Modern Dining Table
Shot in the same room as the Cavara, so look at the foot: this one is an angular X on a RECTANGULAR plinth. It also has the widest choice of finishes here, including a rose gold base. 63 or 70.8 inches long by 35.4 wide, sintered stone on solid carbon steel, rated to 250 lbs. About 20 minutes to assemble.
Linea Dining Table
The only one that runs to 78.7 inches, on a sculpted pedestal base. Three lengths, all 35.4 inches wide and 29.5 inches high.
Materials and care
What a sintered stone top actually is
The Maison, the Cavara and the Modern Dining Table all specify the same 12mm top. Here is what that actually buys you.
Sintered stone, 12mm
Mineral powder fired under pressure into a slab. It is not a laminate and not a coating, so a scratch has nothing to lift. This is the surface the Maison, the Cavara and the Modern Dining Table all specify.
Hot pans are fine
The top is heat resistant, so a dish straight out of the oven will not mark it. A trivet is still the polite habit, but nothing here warps.
Red wine is fine too
Non porous, so wine, oil and coffee sit on the surface instead of soaking in. A damp cloth is the whole maintenance routine. No sealing, no oiling, no polish.
Carbon steel underneath
Those three bases are carbon steel with an anti rust finish, powder coated on the Cavara. The colour you pick is the finish on the metal, not a wrap.
Rounded edges
The Maison and the Modern Dining Table both use anti collision rounded corners, which is worth knowing if there are small people in the house.
Assembly
The Modern Dining Table quotes about 20 minutes with the hardware in the box. Nothing on this page needs a second trip to the hardware shop.
The base is the decision
A table on legs at each end seats people at the ends. A centre pedestal or an X base does not, whatever the length says. This is the single thing most people get wrong.
It is heavy on purpose
A stone top on steel does not rock when you lean on it. It also means two people to carry it in, and a route planned before it arrives.
Weight ratings
Where the manufacturer publishes one we print it: 250 lbs on the Maison and on the Modern Dining Table. The Cavara and the Linea do not publish one, so we do not print a number for them. Email support@zornits.com and we will get it from the manufacturer before you commit.
Chairs
The chair sets that go with them
Everything above is about the table, because that is the decision that either fits the room or does not. 4 Zornits dining chair sets, from $249.99, sold separately. Each one opens on its own page, where you pick the colour. The manufacturer does not publish seat heights, so we do not claim a pairing.
Reviews
What buyers said
Every table above carries its own rating on its card. Six reviews in full below, one from each of the four tables, quoted exactly as written and including a four star and a three star.
Tbh heavier build than i expected. very happy. cant fault it, no notes.
Im in love, thats the review and no damage at all, very pleased
Fast shipping and it was sealed, id order again.
makes me happy every time i use it
Not perfect but good.
bit overpriced for what it is, wanted more
Delivery and returns
The answers people want first
Straight from the Zornits shipping and refund policies. Nothing here is softened.
Can I return a dining table if it does not fit?
No. Furniture and lighting are non-returnable except in cases of damage or defect. That is exactly why this page opens with a sizing guide and prints every length, width and height we have. Measure the room, add 36 inches on each side, then choose.
How fast will it get here?
Processing takes 24 hours and delivery takes 2 to 3 business days, so most orders arrive within 3 to 4 business days of being placed. A tracking link goes out by SMS or email once it ships. Weather, holidays and carrier delays are the usual exceptions.
Can I cancel if I change my mind?
Yes, with no penalty, within 24 hours of placing the order. Email support@zornits.com with the subject line Cancel. After that window, if it has already shipped, contact us and we will help.
What if it arrives damaged or defective?
Contact support@zornits.com immediately with your order details and photo proof. We arrange a replacement. This applies to every table on this page.
How many chairs will fit?
Allow 24 inches of table edge per person, then check whether the base leaves the ends usable. A 63 inch table on end legs takes six, the same length on a centre base usually takes four. Divide the length by 24 and round down, then add the ends only if the base is clear of them.
Where are the chairs?
In the Chairs section above. Four Zornits chair sets, sold separately, each on its own page where you pick the colour and add it to the cart. They are kept out of the table cards so that the sizing advice is about one decision and not two.
Will a standard chair fit under these?
Every table here stands 29 to 29.5 inches high, which is the standard, so a normal dining chair with a 17 to 19 inch seat clears it. The manufacturer does not publish seat heights for the Zornits chair sets, so we will not guess at the pairing. Email support@zornits.com and we will measure a set for you before you order.
Is shipping free?
Free shipping over $50 is a Zornits+ benefit. The membership is $99.99 a year, billed once, cancel any time. Without it, shipping is calculated at checkout.
Measure the room. Then pick the table.
Four tables from $1,399.99, every one of them in the cart in two clicks. If you are between two lengths, email us before you order, because this is not a piece you can send back.
Back to the sizing guide
